| Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE Dubai, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Malaysia, Indonesia, Thailand, Korea, Japan, etc. Halal & Kosher certified Lithium Carbonate and other Lithium Salts like Lithium Bromide, Lithium Chloride, Lithium Citrate, Lithium Molybdate, Lithium Tungstate Manufacturers made in a FDA-GMP plant is offered. |
| The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal and DMF support is available. |
----------
Lithium Molybdate SDS MSDS Sheet of Manufacturers
Lithium Molybdate Specifications of Manufacturers
Lithium Molybdate SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
1. Product Identification
Product name: Lithium Molybdate, Dilithium molybdate, Molybdic Acid Lithium Salt.
CAS No.: 13568-40-6
EINECS EC Number: 236-977-7
Molecular Formula: Li2MoO4
Molecular Weight: 173.82
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Skin corrosion/irritation Category 2
Serious eye damage/eye irritation Category 2A
Specific target organ toxicity - single exposure Category 3, Respiratory system
Labeling according GHS USA & Regulation (EC) No 1272/2008
GHS Label Elements  Irritant |
Signal Words: Danger
Hazard Statements:
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H335: May cause respiratory irritation.
Precautionary Statements:
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash contaminated parts thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P302+352: IF ON SKIN: Wash with plenty of soap and water.
P303+361+353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P403+233+235: Store in a well ventilated place. Keep container tightly closed. Keep cool.
P362: Take off contaminated clothing and wash before reuse.
Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Xi Irritant.
R36/37/38, Risk Phrase: Irritating to eyes, respiratory system and skin
3. Composition/Information on Ingredients
Product name: Lithium Molybdate, Dilithium molybdate, Molybdic Acid Lithium Salt.
CAS No.: 13568-40-6
EINECS EC Number: 236-977-7
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Do not use mouth-to-mouth method if victim inhaled the substance. Induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Get medical attention.
Ingestion: Rinse mouth. Do not induce vomiting without medical advice. If vomiting occurs naturally, have victim lean forward to reduce risk of aspiration. Never give anything by mouth to a victim who is unconscious or is having convulsions. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Use a mild soap if available. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse. For minor skin contact, avoid spreading material on unaffected skin.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
5. Fire Fighting Measures
Fire Extinguishing Media: Water fog. Alcohol foam. Dry chemical. Polymer foam. Dry chemical powder. Carbon dioxide (CO2). Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. In the event of fire and/or explosion do not breathe fumes.
Special Information: Fire may produce irritating, corrosive and/or toxic gases. In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
Products of Combustion: Lithium/lithium oxides, Molybdenum oxide.
6. Accidental Release Measures
Personal precautions: Ensure adequate ventilation. Keep people away from and upwind of spill/leak. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Ventilate closed spaces before entering. Keep out of low areas.
Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not contaminate water.
Methods for containment: Stop leak if you can do so without risk. Prevent entry into waterways, sewers, basements or confined areas.
Methods for cleaning up: Clean up in accordance with all applicable regulations. Should not be released into the environment.
Spill: Avoid dust/mist formation. Avoid breathing dust/mist. Ensure adequate ventilation. Wipe up with absorbent material (e.g. cloth, fleece). Clean contaminated surface thoroughly.
7. Handling and Storage
Handling: Use only with adequate ventilation. Wash thoroughly after handling. Avoid prolonged exposure. Do not empty into drains. Avoid release to the environment.
Storage: Keep away from heat and sources of ignition (spark or flame). Keep containers tightly closed in a cool, well-ventilated place. Store in a closed container away from incompatible materials. Use care in handling/storage. Store in accordance with local/regional/national/international regulation.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits:| Components | Type |
Value |
Lithium Molybdate |
USA ACGIH TWA |
Not established. |
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Physical state: Solid or powder.
Odor: odorless.
pH: NA
Boiling point: Not available.
Melting point/Freezing point: Not available.
Solubility (water): Soluble.
Specific gravity: 2.66.
Molecular Formula: Li2MoO4
Molecular Weight: 173.82
10. Stability and Reactivity
Stability: It is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: It emits Lithium/lithium, oxides, Molybdenum oxide, toxic fumes when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Oxidizing agents, strong acids and bases.
Conditions to Avoid: Avoid moisture, heat, spark and contact with incompatible materials.
11. Toxicological Information
Eyes: Causes serious eye irritation.
Skin: Harmful in contact with skin.
Ingestion: Assumed to be harmful.
Inhalation: harmful.
Toxicity data:
LD50 Oral - Rat - Not available.
Carcinogenicity: Not an identified carcinogen.
Sensitization: May cause sensitization by skin contact.
Local effects: Irritating to eyes, respiratory system and skin. Causes serious eye irritation.
Reproductive toxicity: Lithium and its compounds are possible teratogens by analogy to lithium carbonate which has equivocal human teratogenic data and positive animal teratogenic data.
12. Ecological Information
Toxicity to fish: No data available. It has low toxicity.
Ecotoxicity: It has low toxicity.
Environmental effects: May be harmful to the aquatic environment.
Persistence and degradability: No data available
Mobility in soil: No data available
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.
14. Transport Information
Department of Transportation (DOT-USA): Not regulated.
IMDG: Not regulated.
IATA: Not regulated.
15. Regulatory Information
USA:
SARA 302 Components: Not listed.
SARA 313 Components: Not listed.
SARA 311/312 Hazards: Acute Health Hazard.
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
Section 16 - Additional Information
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************
Lithium Molybdate Manufacturers
Aadhunik Industries
Ankleshwar Gujarat &, Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.
e-mail: info@aadhunikindustries.com
Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Norway, Ukraine, Korea, Japan, Vietnam, etc.
Copyright and Usual Disclaimer is Applicable January 20, 2022